THIS IS A PLASTIC DOMED MAIN DRAIN SUCTION COVER
THIS GRATE IS USED ON A NUMBER OF HAYWARD MAIN DRAINS

THIS WOULD ALSO REPLACE THE NO LONGER AVAILABLE SPX1048C WHICH
WAS THE OLDER STANDARD GRATE.

OUTSIDE DIAMETER: 7-3/4"

HEIGHT: 1 1/2"

GRATE SCREW HOLES
HOLE TO HOLE: 6"
(CENTERLINE MEASUREMENT - CENTER OF HOLE TO CENTER OF HOLE)

THERE ARE 4 REINFORCING TABS ON THE BOTTOM OF THE GRATE.
THE SCREW HOLES ARE BETWEEN 2 OF THE TABS.

THERE ARE NUMEROUS HOLES IN CENTER PORTION OF THE COVER
AND NUMERIOUS SLOTS AROUND THE OUTER EDGE

MARKINGS:
"HAYWARD WG1048 E"; WARNING: SUCTION CAN CAUSE RISK OF DROWNING,
DISEMBOWELMENT, HAIR, LIMB OR BODY ENTRAPMENT, DO NOT USE POOL IF COVER
IS LOOSE, DAMAGED, CRACKED OR MISSING.; AND USE ONLY SUPPLIED SCREWS TO
SECURE COVER IS MOLDED ON TO THE TOP OUTER EDGE OF THE COVER.
WARNING! WITH LOGO (TO DRAW ATTENTION TO READ THE WARNING);
ANSI/ASME A112.19.8M-1987, 2007 WITH ASME LOGO; A #5 RECYCLE LOGO;
HAYWARD'S "H" LOGO; FOR SINGLE OR MULTIPLE DRAIN USE, 125 GPM/SUBMERGED
NSF LISTED; AND FLOOR ONLY, LIFE 7 YEARS ARE ALL MOLDED ON THE INSIDE OF THE LIP PORTION OF THE COVER