Your Shopping List Your Part Cart

Stingl Safety Vacuum Release System SR-500

Stingl Safety Vacuum Release System SR-500


Stingl Safety Vacuum Release System SR-500


The Model SR-500 is a Safety Vacuum
Release System (SVRS) which works by
monitoring the vacuum on the suction side
of the pool or spa pump. When a blockage
occurs in the main drain or skimmer a
sudden rise in vacuum will cause the SR-500
to shut down pump operation and activate
an audible alarm. The pump will remain off
with the alarm sounding until manually
reset.



Features and Benefits


Complies with ASME/
ANSI 112.19.17 as required by the International Building Codes (IBC) and the International Residential Codes (IRC)

Meets all current codes and standards for SVRSs on new and existing pools and spas

Can act as pool controller with programmable timer, or as stand alone SVRS working in conjunction with existing pool controller

Newest state-of-art NEC microprocessor technology-- guaranteed reliability and performance

Vacuum monitored 128 times per second -- rapid response and accurate readings

Power monitored 50/60 times per second -- insures continuous power detection

Can act as a pool and spa controller - with fully programmable 24 hour timer, or as stand alone SVRS working in conjunction with existing pool and spa controller

Integrates with existing timer box - (for easy retrofit)

Low vacuum sensing - (prevents cavitations or running the pump dry, eliminating costly equipment failure)

30 minute maintenance override - (for pool or spa service)

Accessible extra dry contact – auxiliary equipment can be added

Power back-up – insures settings and reading will be saved (30 minute rapid recharge)

Display error readout - (prevents guessing during troubleshooting)

Works on all size pumps

Easy and trouble free installation - (no pipes to cut or glue)

Turns off pump in milliseconds upon detecting sudden vacuum change

Multiple audible alarm capabilities – allows for quicker alert to harmful situations


Product Part Number Price Order
STINGL SWITCH 120/240 V SR500
Regular Price: $649.71
 PoolPartsOnLine.com Sale Price: $568.00 
Quantity:   
STINGL SWITCH POOL & SPA COMBO SR500PS
Regular Price: $720.83
 PoolPartsOnLine.com Sale Price: $626.00 
Quantity:   




Main Drain Cover 12 inch Square - Hayward
Main Drain Cover 12 inch Square - Hayward
Certified to Comply with Section 1404 of the Virginia Graeme Baker Act (VGB) Pool & Spa Safety Act
 
Test Results can be obtained from: www.Haywardnet.com and/or http://www.nsf.org/Certified/Pools/
 
Manufactured: Between October 2008 and December 2008, by Hayward Pool Products in Pomona, CA, a Division of Hayward Industries, Inc. 620 Division Street, Elizabeth, NJ 07207, Phone 9083515400
 
Tested to ANSI/ASME 112.19.82007 (addendum 8a2008) per Section 1404 of the Virginia Graeme Baker Act (VGB) Pool & Spa Safety Act. Certified by NSF International, 789 N. Dixboro, Road, Ann Arbor, MI. 48105 1(800)NSFMARK.
 
Certificates of Compliance:
 
9" x 9" Square Grate
 
12" x 12" Square Grate

18" x 18" Square Grate
  
Installation Manual for Hayward SUCTION OUTLET FRAMES & COVERS

Main Drain Cover Round - Hayward
Main Drain Cover Round - Hayward
THIS IS A PLASTIC DOMED MAIN DRAIN SUCTION COVER
THIS GRATE IS USED ON A NUMBER OF HAYWARD MAIN DRAINS

THIS WOULD ALSO REPLACE THE NO LONGER AVAILABLE SPX1048C WHICH
WAS THE OLDER STANDARD GRATE.

OUTSIDE DIAMETER: 7-3/4"

HEIGHT: 1 1/2"

GRATE SCREW HOLES
HOLE TO HOLE: 6"
(CENTERLINE MEASUREMENT - CENTER OF HOLE TO CENTER OF HOLE)

THERE ARE 4 REINFORCING TABS ON THE BOTTOM OF THE GRATE.
THE SCREW HOLES ARE BETWEEN 2 OF THE TABS.

THERE ARE NUMEROUS HOLES IN CENTER PORTION OF THE COVER
AND NUMERIOUS SLOTS AROUND THE OUTER EDGE

MARKINGS:
"HAYWARD WG1048 E"; WARNING: SUCTION CAN CAUSE RISK OF DROWNING,
DISEMBOWELMENT, HAIR, LIMB OR BODY ENTRAPMENT, DO NOT USE POOL IF COVER
IS LOOSE, DAMAGED, CRACKED OR MISSING.; AND USE ONLY SUPPLIED SCREWS TO
SECURE COVER IS MOLDED ON TO THE TOP OUTER EDGE OF THE COVER.
WARNING! WITH LOGO (TO DRAW ATTENTION TO READ THE WARNING);
ANSI/ASME A112.19.8M-1987, 2007 WITH ASME LOGO; A #5 RECYCLE LOGO;
HAYWARD'S "H" LOGO; FOR SINGLE OR MULTIPLE DRAIN USE, 125 GPM/SUBMERGED
NSF LISTED; AND FLOOR ONLY, LIFE 7 YEARS ARE ALL MOLDED ON THE INSIDE OF THE LIP PORTION OF THE COVER


Main Drain 9
Main Drain 9" Wave Suction Outlet Cover with Frame - Commercial

FOR GRAVITY FED SYSTEMS

9"x9" Square Wave Grate with Screws


Features:


For Single or Multiple Drain Use (See Installation Instructions)


Single:
Floor: 207 GPM at 1.5 fps
Wall: TBD


44.2 square inch opening


#316 Stainless Steel Screws


Manufactured from superior UV-resistant
engineered polymers


Easily and safely retrofits to most brand's
existing frames* (see cross-reference chart
and installation instructions for details and
special requirements)


All components (cover, frame, screws) meet
or exceed NSF 50/ASME/ANSI A112.19.8-
2007 national standards and ASTM G154 UV
testing exposure

 


PoolPartsOnLine.com now on Facebook - be our Fan! PoolPartsOnLine.com now on Twitter RatePoint Site Seal


"AquaLink®, HI-E2®, Jandy®, Never Lube®, Air Energy™, JandyColors™, Jandy Lite 2™, Jandy LT™, Jandy LX™, Jandy LXi™, Ray-Vac™, and Stealth™
are trademarks and/or registered trademarks of Jandy Industries, Inc.
Baracuda®, Clearwater®, Duoclear®, Halcyon®, Leaf Catcher®, Leaf Trapper®, Mars®, Nature2®, Polaris®, Ranger®, SuperTurtle®,
Turbo Turtle®, UniCover®, Zippy®, Zoom®, and Caretaker™ are trademarks and/or registered trademarks of Zodiac Pool Care, Inc.
Zodiac® is a registered trademark of Zodiac International"