8" Low Profile Anti-Entrapment Suction Outlet Cover Retrofit


Main Drain Cover Round - 8" Low Profile - Retrofit

Features For Single or Multiple Drain Use (See Installation Instructions) Single: Floor: 100 GPM at 4.2 fps / Wall: 70 GPM at 2.9 fps Dual: Floor: 100 GPM at 2.1 fps / Wall: 70 GPM at 1.5 fps Triple System: Floor: 200 GPM at 2.8 fps / Wall: 140 GPM at 1.9 fps Floor: 108 GPM at 1.5 fps 7.7 sq. in. Opening 3 Sets of Different Stainless Steel Screws Manufactured from Super Strong UV Resistant ABS/ASA Material Easily and Safely Retrofits to Most Brand's Existing Frames and Sumps That Model #s LP8AVxxx and 8AVxxx Do Not Already Fit* (See Cross-Reference Chart and Installation Instructions for Details) Patent Pending Flow-Max® Technology Super Low-Profile Eliminates Cleaner Hang-Ups Meets or Exceeds ASME/ANSI A112.19.8-2007 National Standards and ASTM G154 UV Testing E-mail this product to a friend

Product	Part Number	Price	Order
8 inch Retro Drain Cover - White	RLP8AVVGB101	Price: $24.18	Quantity:
8 inch Retro Drain Cover - Black	RLP8AVVGB102	Price: $24.18	Quantity:
8 inch Retro Drain Cover - Lt. Gray	RLP8AVVGB103	Price: $24.18	Quantity:
8 inch Retro Drain Cover - Blue	RLP8AVVGB104	Price: $24.18	Quantity:
8 inch Retro Drain Cover - Dk. Gray	RLP8AVVGB105	Price: $24.18	Quantity:
8 inch Retro Drain Cover - Bone	RLP8AVVGB106	Price: $24.18	Quantity:
8 inch Retro Drain Cover - Taupe	RLP8AVVGB107	Price: $24.18	Quantity:
8 inch Retro Drain Cover - Tan	RLP8AVVGB108	Price: $24.18	Quantity:

Teledyne Laars Series ONE EPC EPS Heater Parts

Series One EPC and EPS Heaters (Mfg. 1990-1992)

Click here for more information...

Main Drain Cover Round - Hayward

THIS IS A PLASTIC DOMED MAIN DRAIN SUCTION COVER
THIS GRATE IS USED ON A NUMBER OF HAYWARD MAIN DRAINS

THIS WOULD ALSO REPLACE THE NO LONGER AVAILABLE SPX1048C WHICH
WAS THE OLDER STANDARD GRATE.

OUTSIDE DIAMETER: 7-3/4"

HEIGHT: 1 1/2"

GRATE SCREW HOLES
HOLE TO HOLE: 6"
(CENTERLINE MEASUREMENT - CENTER OF HOLE TO CENTER OF HOLE)

THERE ARE 4 REINFORCING TABS ON THE BOTTOM OF THE GRATE.
THE SCREW HOLES ARE BETWEEN 2 OF THE TABS.

THERE ARE NUMEROUS HOLES IN CENTER PORTION OF THE COVER
AND NUMERIOUS SLOTS AROUND THE OUTER EDGE

MARKINGS:
"HAYWARD WG1048 E"; WARNING: SUCTION CAN CAUSE RISK OF DROWNING,
DISEMBOWELMENT, HAIR, LIMB OR BODY ENTRAPMENT, DO NOT USE POOL IF COVER
IS LOOSE, DAMAGED, CRACKED OR MISSING.; AND USE ONLY SUPPLIED SCREWS TO
SECURE COVER IS MOLDED ON TO THE TOP OUTER EDGE OF THE COVER.
WARNING! WITH LOGO (TO DRAW ATTENTION TO READ THE WARNING);
ANSI/ASME A112.19.8M-1987, 2007 WITH ASME LOGO; A #5 RECYCLE LOGO;
HAYWARD'S "H" LOGO; FOR SINGLE OR MULTIPLE DRAIN USE, 125 GPM/SUBMERGED
NSF LISTED; AND FLOOR ONLY, LIFE 7 YEARS ARE ALL MOLDED ON THE INSIDE OF THE LIP PORTION OF THE COVER

Click here for more information...

Swimquip Light Parts

Click here for more information...