Installation is quick and easy and can be performed with no modifications to the pool surface or structure since Levolor needs no extra in-deck canisters or under-deck pressurized lines. The sensors can be located in either a skimmer throat, behind the weir door arc or a static pipe - wherever a constant level of water can be measured. For convenience, sensor wires
include both skimmer and static pipe sensors. Electronics are contained in a waterproof, wall mounted unit built for an outdoor environment. Everything is easily wired through 1/2” conduit connections. The easy-to-read LED display effectively communicates the status, if you ever need to check the system at all.

With models for pool, spa, dual equipment, fountains and Vanishing Edge catch basins, we have an ideal water leveling solution for your unique design. Most designs will benefit from our basic fill models, such as the K-1100 or LX2. For two separate bodies of water, the K-2300 provides everything you need, and the K-2000 is ideal for Vanishing Edge, perimeter
overflow designs where high and low level sensing is needed, and activates a pump. The K-2100 is for ponds with a low level cut-off that turns off a pump or light.

Levolor Electronic Water Leveling Systems:

K-1100 Fill system for pools and spas.

LX2 Fill system (Static pipe) for pools and spas.

K-2000 Fill system for Vanishing Edge pools with high level switch that activates a pump.

K-2100 Fill systems for fountains with low level cut-off that turn off the pump.

K-2300 Fill system for two separate bodies of water with two sensors and two solenoid valves