|This is a plastic domed main drain suction cover. This grate is used on a number of Hayward main drains
This would also replace the no longer available spx1048c which was the older standard grate.
Outside diameter: 7-3/4"
height: 1 1/2"
grate screw holes
hole to hole: 6"
(centerline measurement - center of hole to center of hole)
there are 4 reinforcing tabs on the bottom of the grate.
The screw holes are between 2 of the tabs.
There are numerous holes in center portion of the cover and numerous slots around the outer edge
"Hayward wg1048 e"; warning: suction can cause risk of drowning, disembowelment, hair, limb or body entrapment, do not use pool if cover is loose, damaged, cracked or missing.; and use only supplied screws to secure cover is molded on to the top outer edge of the cover.
Warning! With logo (to draw attention to read the warning); ansi/asme a112.19.8m-1987, 2007 with asme logo; a #5 recycle logo; Hayward's "h" logo; for single or multiple drain use, 125 gpm/submerged nsf listed; and floor only, life 7 years are all molded on the inside of the lip portion of the cover