 |
| Main Drain Cover - Round Waterway |
|
Part no. |
Size |
Open Area (Sq In) |
Floor Flow Rate GPM @ Velocity (fps) |
|
640-231x |
8" |
11.83 |
100 @ 2.72 ft/sec |
|
640-311x |
10" |
14.34 |
180 @ 4.04 ft/sec |
|
Part no. |
Wall Flow Rate GPM @ Velocity (fps) |
GPM @ 1.5 fps |
Frame Size |
|
640-231x |
64 @ 1.73 ft/sec |
55 |
9" |
|
640-311x |
100 @ 2.24 ft/sec |
67 |
11" |
** Colored Grates may be special order ** |
|
|
|
|
 |
| Main Drain Cover Round - Hayward |
THIS IS A PLASTIC DOMED MAIN DRAIN SUCTION COVER
THIS GRATE IS USED ON A NUMBER OF HAYWARD MAIN DRAINS
THIS WOULD ALSO REPLACE THE NO LONGER AVAILABLE SPX1048C WHICH
WAS THE OLDER STANDARD GRATE.
OUTSIDE DIAMETER: 7-3/4"
HEIGHT: 1 1/2"
GRATE SCREW HOLES
HOLE TO HOLE: 6"
(CENTERLINE MEASUREMENT - CENTER OF HOLE TO CENTER OF HOLE)
THERE ARE 4 REINFORCING TABS ON THE BOTTOM OF THE GRATE.
THE SCREW HOLES ARE BETWEEN 2 OF THE TABS.
THERE ARE NUMEROUS HOLES IN CENTER PORTION OF THE COVER
AND NUMERIOUS SLOTS AROUND THE OUTER EDGE
MARKINGS:
"HAYWARD WG1048 E"; WARNING: SUCTION CAN CAUSE RISK OF DROWNING,
DISEMBOWELMENT, HAIR, LIMB OR BODY ENTRAPMENT, DO NOT USE POOL IF COVER
IS LOOSE, DAMAGED, CRACKED OR MISSING.; AND USE ONLY SUPPLIED SCREWS TO
SECURE COVER IS MOLDED ON TO THE TOP OUTER EDGE OF THE COVER.
WARNING! WITH LOGO (TO DRAW ATTENTION TO READ THE WARNING);
ANSI/ASME A112.19.8M-1987, 2007 WITH ASME LOGO; A #5 RECYCLE LOGO;
HAYWARD'S "H" LOGO; FOR SINGLE OR MULTIPLE DRAIN USE, 125 GPM/SUBMERGED
NSF LISTED; AND FLOOR ONLY, LIFE 7 YEARS ARE ALL MOLDED ON THE INSIDE OF THE LIP PORTION OF THE COVER
|
|
|
|
|
|
|
|
|
|
